CMMC Level 2 Gap Assessment: What It Covers and How It Scores

CMMC and DFARSPublished Last reviewed November 20269 min read

Short answer

A CMMC Level 2 gap assessment tests your environment against the 110 NIST SP 800-171 Rev 2 requirements and their assessment objectives, scores each one with the 32 CFR 170.24 point method, and shows where you stand before anything goes into SPRS. You should receive scored findings, a projected score, a list of POA&M candidates and a scope record for your Microsoft 365 tenant.

Check where you stand: take the CMMC readiness check. About two minutes, no email needed.

Update, November 2026

On July 13, 2026, DoD suspended the CMMC Phase 2 requirements that had been scheduled for November 10, 2026, and no restart date had been announced as of November 15, 2026; Level 1 and Level 2 self assessments, annual affirmations in SPRS and DFARS 252.204-7012 remain in effect. Separately, DFARS class deviations that took effect in February 2026 removed 252.204-7019 and replaced 252.204-7020 with 252.240-7997, which no longer includes the Basic Assessment, while Level 2 (Self) results are still entered in SPRS under 32 CFR 170.16. In November 2026, a defense contractor Ethereum Tech prepared passed its CMMC Level 2 C3PAO assessment with 100 percent of requirements met.

If your company handles controlled unclassified information (CUI) for the Department of Defense, a CMMC Level 2 gap assessment is the first honest look at where you stand. It tests your environment against the 110 security requirements in NIST SP 800-171 Revision 2, scores the result the way DoD scores it, and separates the gaps that block a passing score from the ones you can carry on a plan of action and milestones (POA&M).

The timing matters. Phase 1 of CMMC implementation began November 10, 2025, when the DFARS acquisition rule took effect, so solicitations can now make a Level 2 self assessment a condition of award. Phase 2, scheduled for November 10, 2026, adds certification assessments by a CMMC Third Party Assessment Organization (C3PAO). Early 2026 is the time to find out what is missing, while you can still fix it on your own schedule.

What does a CMMC Level 2 gap assessment cover?

It covers scope, all 110 requirements and the evidence behind each one. Scope comes first because every score depends on it.

The CMMC Program rule at 32 CFR 170.19 sorts Level 2 assets into five categories. CUI Assets process, store or transmit CUI and are assessed against every requirement. Security Protection Assets, such as your identity provider and the tools your managed service provider uses, are assessed against the requirements relevant to what they do. Contractor Risk Managed Assets can handle CUI but are kept from it by policy and practice, and must be documented in the asset inventory and system security plan (SSP). Specialized Assets, such as test equipment and operational technology, must be documented and managed under your own risk based policies. Assets that are out of scope still need a written reason they cannot touch CUI.

Then every requirement is tested against its assessment objectives in NIST SP 800-171A, the same objectives a C3PAO uses. Evidence comes from documents, interviews and live demonstration. For a Microsoft 365 shop, that means Microsoft Entra ID Conditional Access policies, Intune compliance and configuration profiles, Microsoft Purview audit settings, Microsoft Defender for Endpoint coverage, and how Exchange Online, SharePoint, OneDrive and Teams handle CUI.

Across more than 200 Microsoft 365 and Azure tenants, we rarely find that a contractor is missing a product. More often a setting was never enforced, or the written policy describes something the configuration does not do.

How does a gap assessment score the 110 NIST SP 800-171 requirements?

It uses the CMMC Scoring Methodology in 32 CFR 170.24. You start at 110 and subtract the point value of every requirement that is NOT MET. Each requirement is worth 5, 3 or 1 point, and the total can go negative.

A requirement is MET only when every applicable assessment objective is satisfied by evidence. Miss one objective and the whole requirement is NOT MET. Requirements that do not apply are scored N/A, which counts the same as MET, though each one needs an explanation. Temporary deficiencies addressed in an operational plan of action, and enduring exceptions documented in the SSP with their mitigations, can also be scored MET.

Partial credit exists in only two places. Multifactor authentication (IA.L2-3.5.3) costs 3 points instead of 5 if it covers remote and privileged users but not everyone else. Encryption of CUI (SC.L2-3.13.11) costs 3 points instead of 5 if you encrypt but the cryptography is not FIPS validated.

The 5 point group includes basics such as audit logging (AU.L2-3.3.1) and malicious code protection (SI.L2-3.14.2), so a few misses move the number fast. CMMC adopted this scoring from the NIST SP 800-171 DoD Assessment Methodology, so a gap assessment score and an SPRS score use the same scale.

What deliverables should a gap assessment produce?

You should receive a scored findings register, a projected score, a list of POA&M candidates and a record of your scope. If you get a slide deck of colored circles instead, ask for the register.

DeliverableWhat it containsWhy it matters
Scored findings registerAll 110 requirements marked MET, NOT MET or N/A, with the failed objective, evidence reviewed and point valueThe working draft of your formal self assessment
Projected scoreYour score under 32 CFR 170.24 as of the assessment dateShows whether you clear 88, the floor for Conditional status
POA&M candidatesNOT MET items the rule allows on a POA&MSeparates what can wait from what must be fixed first
Scope recordAsset inventory by category, boundary diagram and CUI data flowsEvery assessor starts here
SSP gap notesWhere the SSP is missing, stale or does not match the tenantCA.L2-3.12.4 can never sit on a POA&M

How does the score affect SPRS and Conditional status?

The projected score tells you what you could honestly enter in the Supplier Performance Risk System (SPRS) today and whether a POA&M is available to you. Under 32 CFR 170.21, a Level 2 POA&M is allowed only when your score divided by 110 is at least 0.8, which is 88 points.

Each requirement on the POA&M must carry a point value of 1, with one exception for SC.L2-3.13.11 when encryption is in place but not FIPS validated. Six requirements can never go on a POA&M: AC.L2-3.1.20 for external connections, AC.L2-3.1.22 for publicly accessible content, CA.L2-3.12.4 for the SSP, and PE.L2-3.10.3, PE.L2-3.10.4 and PE.L2-3.10.5 for escorting visitors, physical access logs and managing physical access.

A qualifying POA&M gives you Conditional Level 2 (Self) status. You then have 180 days from the status date to close it with a closeout assessment, or the conditional status expires.

If your contracts carry DFARS 252.204-7019 and 252.204-7020, you likely have a Basic Assessment score in SPRS on the same scale. If the gap assessment shows that number was too high, correct it rather than waiting for a solicitation to raise the question.

Does it matter whether you run Microsoft 365 GCC or GCC High?

Yes, because the tenant is part of your scope and the first question is whether CUI is in the right one. Microsoft says Microsoft 365 GCC High supports CMMC Level 2 and Level 3 requirements when configured appropriately, and that GCC is not suitable for CUI Specified categories that require US sovereignty.

Many small contractors run on commercial Microsoft 365 or GCC today. A gap assessment should document where CUI actually lands, including email, Teams chats and personal OneDrive folders, and whether each cloud service that touches it meets the DFARS 252.204-7012 expectation of FedRAMP Moderate or equivalent security. If the evidence points toward GCC High, plan for the eligibility validation Microsoft requires before it establishes a GCC High environment.

Being on GCC High does not settle the question. We still find GCC High tenants where Conditional Access allows legacy authentication or guest sharing was never restricted. Microsoft covers its part of the shared responsibility model. Your part is what the gap assessment scores, and much of it overlaps with a Microsoft 365 security assessment.

How should a small defense contractor prepare for a gap assessment?

Gather what you have, name who owns it, and hold off on changes until the findings are in. A Level 2 gap assessment typically takes about four weeks, and what you hand over at the start shapes how useful the results are.

  1. Pull every active contract and subcontract and list its DFARS clauses, especially 252.204-7012, 252.204-7019, 252.204-7020 and any CMMC level named under 252.204-7021.
  2. Write down where CUI enters the company and where it is stored and shared, including email, SharePoint, Teams, laptops, file shares and any engineering or ERP system.
  3. Collect your current SSP, policies, network diagram and asset inventory, even if they are out of date. Stale documents are findings, not a reason to wait.
  4. Confirm which Microsoft 365 environment you use (commercial, GCC or GCC High) and which tenant holds CUI.
  5. Arrange read access to Microsoft Entra ID, Intune, Microsoft Purview and Microsoft Defender, or screen sharing time with the admin who has it.
  6. List every external service provider that touches the environment, including your managed service provider, and the documents that say who does what.
  7. Name an owner for each of the 14 requirement families and decide who will serve as your affirming official.

Resist the urge to fix things the week before. A configuration change without a matching policy and change record often creates a new finding instead of closing an old one.

Our CMMC compliance services page explains how we run these engagements, and the short readiness check is a reasonable first step if you are not sure where you stand.

If you want to talk through your scope, your tenant or what a gap assessment would look like for your contracts, book a 30 minute call with our team.

Frequently asked questions

Is a gap assessment the same as a mock CMMC assessment?

No. A gap assessment finds and scores what is missing so you know what to fix and in what order. A mock assessment rehearses the formal assessment against a finished SSP and evidence set, so it usually comes later, once the findings from the gap assessment have been worked.

Can a small company run its own CMMC Level 2 gap assessment?

Yes. Nothing in 32 CFR 170 requires an outside party for a gap assessment or a Level 2 self assessment. An outside assessor brings objectivity and knows where assessors look, but your affirming official still owns the result and signs the affirmation either way.

Does the gap assessment score get posted to SPRS?

No. A gap assessment is an internal working document. What goes into SPRS is the score from your formal self assessment, along with the date, scope, CAGE codes and POA&M status. Post only a score that reflects the environment as it stands on the day you enter it.

Should we move to GCC High before the gap assessment?

Usually not. The gap assessment tells you where CUI actually lives and which systems are in scope, and that answer drives the platform decision. Moving first can mean paying for a migration that does not match your real data flows or leaves CUI behind in other systems.

What if we only handle federal contract information and no CUI?

Then CMMC Level 1 is the likely requirement. It covers the 15 basic safeguarding requirements in FAR 52.204-21, with an annual self assessment and affirmation entered in SPRS. A Level 2 gap assessment would be more than you need, though a short scoping review is still worthwhile.

Keep reading

Related guides

Have a question this raised?

Bring it to a 30 minute call and leave knowing where you stand and what comes next.

Book a 30 minute call

(786) 577-9743sales@ethereumtech.ai

Or take the two minute starting point check