Find your CMMC level and where you stand, in six questions.
- Works out whether your contracts point to Level 1 or Level 2, and what kind of assessment you have been asked for.
- Places you at a stage, from scoping to ready for assessment, with the first three things to fix or check.
- No name or email. Your result shows on this page, and if you book a call, it comes with you.
A defense contractor we prepared passed its CMMC Level 2 C3PAO assessment with every requirement met. The work began with a four week gap assessment that scored all 110 NIST SP 800-171 requirements.
Six questions, about two minutes.
Pick the answer closest to yours. You can go back at any point.
- No name or email needed
- Your result shows on this page
- If you book, your result comes with you
The six possible results are listed below. With JavaScript on, the check picks the one that fits your answers.
Where you stand, stage 1 of 3
CMMC Level 2: scope and score first
- Scope and score
- Document and fix
- Prove it
CUI points to Level 2: the 110 requirements in NIST SP 800-171 Rev 2. Without a posted score or an SSP, the first job is drawing the boundary around CUI and scoring yourself the way SPRS counts.
First three things to fix or check
- Where CUI lives in Microsoft 365 and who can reach it
- A score against all 110 requirements, starting at 110 and taking off 1, 3 or 5 points for each one not met
- An SSP written from what is actually deployed
What to bring to the call
The contract clause or the prime’s request, and a list of where defense work happens today: mailboxes, sites and laptops.
Where you stand, stage 2 of 3
CMMC Level 2: documented, not yet proved
- Scope and score
- Document and fix
- Prove it
You have a score or an SSP, but one of them may not hold up. An assessor, or a prime reading your SPRS entry, expects the score, the SSP and the tenant to match.
First three things to fix or check
- Score all 110 requirements again, against the tenant as it runs today
- Update the SSP so each requirement names what meets it and who owns it
- Check that every open POA&M item is allowed there and has a date
What to bring to the call
Your SSP, your POA&M and the score you posted, with the date you posted it.
Where you stand, stage 3 of 3
CMMC Level 2: ready to prove it
- Scope and score
- Document and fix
- Prove it
Your score is current and your SSP matches. What remains is showing it: evidence for each requirement, in the way an assessor examines, interviews and tests.
First three things to fix or check
- Evidence behind each requirement, including the ones met outside the tenant
- A mock assessment: documents examined, people interviewed, settings tested
- The yearly affirmation in SPRS, and who signs it
What to bring to the call
Your SSP, any open POA&M items, and the assessment your contract or prime asked for.
Where you stand, stage 1 of 2
CMMC Level 1: start the self assessment
- Self assess
- Keep it current
Federal contract information alone points to Level 1: 15 requirements from FAR 52.204-21, a self assessment every year and an affirmation in SPRS. No POA&M is allowed at Level 1, so every requirement has to be met.
First three things to fix or check
- That your contracts involve federal contract information only
- Each of the 15 requirements against your tenant and devices
- Who signs the yearly affirmation, and what they are signing
What to bring to the call
The contract clause, and any self assessment you have already started.
Where you stand, stage 2 of 2
CMMC Level 1: keep it current
- Self assess
- Keep it current
You have a Level 1 self assessment to build on. It is repeated and affirmed every year, and it only holds while every one of the 15 requirements stays met.
First three things to fix or check
- The date of your last self assessment and affirmation, since both come due every year
- Evidence for each of the 15 requirements, including what changed since: new staff, devices or cloud apps
- Whether any contract now involves CUI, which would bring Level 2
What to bring to the call
Last year’s self assessment and the date you affirmed it.
Where you stand: before scoping
Find out what your contracts hold first
Your level depends on the data your contracts involve. Federal contract information alone points to Level 1, and CUI points to Level 2. Reading the contracts and the markings on what you receive settles it.
First three things to fix or check
- The clauses in your current contracts and subcontracts
- Markings on what you receive, such as CUI banners on drawings
- Where that information is stored and who can reach it
What to bring to the call
One or two current contracts or purchase orders, and an example of what you receive from the prime.
Also from your answers
Your date is within 30 days and the basics are not in place yet. Call first, so we can decide together what can be true by your date: (786) 577-9743
No score posted. Under DFARS 252.204-7019, a contract that requires NIST SP 800-171 needs a current assessment in SPRS, no more than three years old, before award.
A score more than three years old is not current under DFARS 252.204-7019, and the score should match the tenant as it runs today.
No SSP. The SSP requirement, CA.L2-3.12.4, is one of the few that can never sit on a POA&M, so it has to exist before any assessment.
CMMC Phase 2, which would have brought C3PAO assessments into more contracts, was suspended on July 13, 2026. C3PAO Level 2 assessments remain available, so we will confirm what your contract or prime actually requires.
A Level 2 self assessment is repeated every three years, with an affirmation in SPRS at the time and every year after.
Your request names Level 1, but you selected CUI. CUI brings NIST SP 800-171 in through DFARS 252.204-7012, so we will read the contract and the data together.
Your request names Level 2, the level meant for CUI. Level 2 still applies to that contract, so we will check it against the data you actually receive.
CUI in commercial Microsoft 365. Microsoft lists commercial Microsoft 365 for Level 1 and GCC High for Level 2, and a cloud that holds CUI must meet FedRAMP Moderate or its equivalent. We will check whether a smaller GCC High enclave would do. See Microsoft 365 GCC High
Microsoft 365 GCC. Microsoft says GCC is not suitable for CUI Specified, such as export controlled data, which needs GCC High. We will check what your contracts name. See Microsoft 365 GCC High
You already use GCC High. We will check that CUI stays inside it, including mail and personal storage, where Microsoft says spillage happens most often.
Our engineering focus is Microsoft 365 and Azure. We can talk through fit on the call.
File servers and mixed setups are in scope too. We map every place CUI is stored before deciding what moves.
Not knowing where the data lives is common. Finding every place it sits is the first step of scoping.
Your answers
- Asked for
- Data
- Where it lives
- SPRS
- SSP and POA&M
- Date
This is a starting point based on your answers, not an assessment or legal advice.
How the check decides
No scores and no percentages. Your result comes from your answers in four plain steps.
-
Your data sets the level
CUI points to Level 2. Federal contract information alone points to Level 1. If your contract or prime names Level 2, that level stands. If nothing has been asked yet and you are not sure what data you hold, the first step is reading the contracts.
-
Your SPRS entry and SSP set the stage
No posted score, or no SSP, keeps you at stage 1. A score or SSP that may be out of date, or a draft SSP, keeps you at stage 2. Both current puts you at stage 3.
-
The earliest gap decides
Your stage is the earliest one any answer points to, because the later steps depend on the earlier ones.
-
Your cloud, your request and your date add notes
Commercial Microsoft 365, GCC, a C3PAO request, a mismatch between the level asked for and your data, or a date within 30 days each add a short note to your result.
Questions about the check
Is this a CMMC assessment?
No. It is a starting point based on your answers, not an assessment or legal advice. An assessment checks your actual environment against each requirement, with evidence.
Phase 2 is suspended. Does this still matter?
Yes. DoD suspended Phase 2 on July 13, 2026, but the Phase 1 self assessment requirements remain, and DFARS 252.204-7012 still requires NIST SP 800-171 for CUI.
Why a stage and not a score?
A real SPRS score needs all 110 requirements checked against evidence, and six questions cannot do that honestly. The stage tells you which work comes first.
Do I need to give my name or email?
No. The check runs in your browser and shows the result on this page. If you book a call, your result and your date travel in the booking link, so you do not have to explain them again.
What happens after you book
- You pick a time that suits you on the booking page.
- Your result comes with you, so the call starts from your stage.
- On the call we go through your contract, your answers and what comes first.
Bring your result to a 30 minute call.
We go through your contract, your answers and your date. You leave knowing which level applies and what to fix first.