Find out which report your customer needs, and where you stand, in six questions.

  • Works out whether the request points to SOC 2 Type 1, Type 2 or ISO 27001, and whether your date fits.
  • Places you at a stage, from building controls to ready for the auditor, with the first three things to fix or check.
  • No name or email. Your result shows on this page, and if you book a call, it comes with you.

Start the checkOr book a 30 minute call

Sample resultAn example of the result card. It shows where you stand as stage 2 of 3, SOC 2: run the controls and keep the records, then the first three things to check and what to bring to a call.SAMPLE RESULTWhere you stand, stage 2 of 3SOC 2: run the controlsand keep the recordsBuildRun, recordAuditor readyFirst three things to check123Find controls with no record yetDecide where each record livesCheck Type 1 or Type 2 fitsWhat to bring to the callYour policies and the customer’srequest

One client moved from a SOC 2 Type 1 report to a clean Type 2. One client’s ISO 27001 certificate was issued against the 2022 version.

Six questions, about two minutes.

Pick the answer closest to yours. You can go back at any point.

  • No name or email needed
  • Your result shows on this page
  • If you book, your result comes with you

The seven possible results are listed below. With JavaScript on, the check picks the one that fits your answers.

Where you stand, stage 1 of 3

SOC 2: build the controls first

  1. Build the controls
  2. Run and record
  3. Ready for the auditor

Little is written down yet, so the first job is choosing the controls you will run, writing them down and putting them in place in Microsoft 365, Azure and your product.

First three things to fix or check

  1. Exactly what the customer asked for: which report, which type and by when
  2. The scope: which systems, teams and data the report will cover
  3. The controls that already run, such as MFA and device management, and what each would need to show

What to bring to the call

The customer’s request or questionnaire, and the date they need it.

Book a 30 minute callSee SOC 2 and ISO 27001

Where you stand, stage 2 of 3

SOC 2: run the controls and keep the records

  1. Build the controls
  2. Run and record
  3. Ready for the auditor

Policies exist but the records are patchy. A Type 2 report tests whether controls operated throughout a period, so each control needs dated records that it ran.

First three things to fix or check

  1. Which controls have no record yet, such as access reviews or change approvals
  2. Where each record will live, so it can be pulled for any date
  3. Whether Type 1 or Type 2 fits your date

What to bring to the call

Your policies and the customer’s request.

Book a 30 minute callSee SOC 2 and ISO 27001

Where you stand, stage 3 of 3

SOC 2: ready for the auditor

  1. Build the controls
  2. Run and record
  3. Ready for the auditor

Your controls run and leave records. What remains is agreeing the report type, period and scope, and checking the evidence the way an auditor will.

First three things to fix or check

  1. The report type, period and scope, agreed with the customer and the audit firm
  2. A walk through of each control’s evidence
  3. The description of your system that goes into the report

What to bring to the call

Your control list and a sample of your evidence.

Book a 30 minute callSee SOC 2 and ISO 27001

Where you stand, stage 1 of 3

ISO 27001: scope the program first

  1. Scope the program
  2. Run and record
  3. Ready for the audit

An ISO 27001 certificate is issued by an accredited audit firm against the 2022 version of the standard, and it covers a stated scope. With little written down, the scope and the risks come first.

First three things to fix or check

  1. The scope: which sites, teams, systems and services the certificate covers
  2. A risk assessment of that scope
  3. Which controls you will apply, and why

What to bring to the call

The customer’s request, and a list of the teams and systems in scope.

Book a 30 minute callSee SOC 2 and ISO 27001

Where you stand, stage 2 of 3

ISO 27001: run it and record it

  1. Scope the program
  2. Run and record
  3. Ready for the audit

Policies exist but the records are patchy. The certificate audit looks for evidence the program runs, not only that it is written.

First three things to fix or check

  1. Which of your chosen controls have no record yet
  2. Who owns each control, and where its record lives
  3. Whether your risk assessment still matches the systems in scope

What to bring to the call

Your policies, scope and risk assessment.

Book a 30 minute callSee SOC 2 and ISO 27001

Where you stand, stage 3 of 3

ISO 27001: ready for the audit

  1. Scope the program
  2. Run and record
  3. Ready for the audit

Your program runs and leaves records. What remains is checking it against the scope and choosing the audit firm that will issue the certificate.

First three things to fix or check

  1. Your scope and risk assessment, checked against what runs today
  2. A walk through of the evidence for each control you chose
  3. An accredited audit firm that issues certificates against ISO/IEC 27001:2022

What to bring to the call

Your scope statement, risk assessment and control list.

Book a 30 minute callSee SOC 2 and ISO 27001

Where you stand: before choosing

Find out which one they will accept first

A SOC 2 report is issued by a CPA firm. An ISO 27001 certificate is issued by an accredited audit firm. Ask the customer in writing which one they will accept before any work starts.

First three things to fix or check

  1. Which report or certificate they will accept, in writing
  2. The date they need it by
  3. Whether a completed questionnaire will do in the meantime

What to bring to the call

The request or questionnaire.

Book a 30 minute callSee SOC 2 and ISO 27001

Also from your answers

This is a starting point based on your answers, not an audit, an assessment or legal advice.

How the check decides

No scores and no percentages. Your result comes from your answers in four plain steps.

  1. Your customer’s request sets the route

    SOC 2, ISO 27001, or a request that does not say, each have their own result.

  2. Your records and your owner set the stage

    Very little written down keeps you at stage 1. Patchy records, or nobody owning the program, keep you at stage 2.

  3. The earliest gap decides

    Your stage is the earliest one any answer points to, because records depend on controls, and the audit depends on records.

  4. Your date, your systems and your history add notes

    A close date, a product outside Microsoft, or an earlier audit each add a short note.

Questions about the check

Do you perform the SOC 2 audit or issue the certificate?

No. A SOC 2 report is issued by a CPA firm, and an ISO 27001 certificate by an accredited audit firm. We prepare you and work alongside the firm you choose.

Type 1 or Type 2: which should we get?

The one your customer will accept. A Type 1 report looks at the design of controls as of a specific date; a Type 2 report also tests that they operated over a period.

Is this an audit or an assessment?

No. It is a starting point based on your answers, not an assessment. An assessment looks at your actual controls and records.

Do I need to give my name or email?

No. The check runs in your browser and shows the result on this page. If you book a call, your result and your date travel in the booking link.

What happens after you book

  1. You pick a time that suits you on the booking page.
  2. Your result comes with you, so the call starts from your stage.
  3. On the call we go through your customer’s request, your answers and what comes first.

Bring your result to a 30 minute call.

We go through your customer’s request, your answers and your date. You leave knowing which report fits and what to fix first.

Book a 30 minute call

(786) 577-9743 sales@ethereumtech.ai